The difference between dye sublimation printer and direct-injection digital printing machine is that the thermal transfer digital printing machine prints the printed pattern on paper and then thermally transfers it to the fabric, so the material used for dye sublimation is thermal transfer paper. But many customers say that the dye sublimation digital printing machine often rubs the paper when printing, what is the problem? Today Fedar brings you the reasons and solutions.


Reasons and solutions for rubbing paper when dye sublimation printer is printing：
1. There are two situations in which the image is left to right. One is that the grating is dirty or broken, and the second reason may be that the servo motor is broken.
2. The copper sleeve is loose, or the guide rail is relatively astringent. It is recommended to add some oil to see. If it still does not work, fix the copper sleeve with glass glue so that it will not fall off.
3. The height of the trolley is too low, and the distance between the printing trolley and the paper is too small. If the paper is rubbed in this way, the height of the trolley should be adjusted down. Generally, the height of a coin is moderate.

By checking the above three items, the problem of paper rubbing on the dye sublimation printer will be solved smoothly. At the same time, it is also reminded that if the picture is deviated when printing, you can check and wipe off the grating, or check the servo motor, and check whether the belt is loose when moving. It is very important to keep the machine clean.

FEDAR sublimation printer company has absorbed and condensed a group of high-quality professional technicians and enterprising young management groups, formed a strong technical team and increasingly rigorous management system,providing customers with high-quality printing machines and services,and has established a good brand image and reputation in industry.