Fedar heat transfer printer head is a precision part, and improper operation can easily cause damage or even burn fedar print head. Due to various needs in the operation of fedar heat transfer printer, it is necessary to remove and install print head, so how to do that correctly?
 
1. Removal of the print head of fedar heat transfer printer
① Empty the ink in printer head and rinse it with a special cleaning fluid;
②Turn off the power of fedar heat transfer printer and unplug the power socket;
③Test fedar heat transfer printer body with a multimeter to see if there is static electricity, and discharge the static electricity;
④Remove the right screw that fixes printer head, loosen the upper screw and the left screw, and remove printer head;
⑤Put fedar heat transfer printer head on the non-woven fabric with cleaning fluid and put it in printhead box.

2. Installation of fedar heat transfer printer head
① The print head of fedar heat transfer printer should be powered off when it is installed. If it is easy to break print head when it is powered on, gently push the trolley to move left and right after installation to check whether it is smooth. The print head can be powered on after it is installed.
②Don't install ink when fedar heat transfer printer is powered on, check if there is any bad contact, otherwise printer head will burn out due to short circuit.
③The surface of print head of fedar heat transfer printer must be protected from collision to avoid damage and deformation, which will affect the normal operation of fedar heat transfer printer.
④ At this time, you can add ink, check the ink level, ink suction pump and cleaning sheet.
⑤Most of printer head of fedar heat transfer printer installed for the first time have air inside, so you must print a picture sample to exhaust the air before performing normal printing.
 
The print head is the key part of fedar heat transfer printer, and it must be operated according to the correct operation steps. Print head of fedar heat transfer printer adopts Epson printhead technology, leading technology, guaranteed quality and longer service life.