How should users who use fedar sublimation printer maintain printing machines during long holidays? Today, Fedar sublimation printer will share with you some printing machine maintenance methods!
 
1.Fedar sublimation printer maintenance before long holidays
 
①Check whether fedar sublimation printer head is normal, print test strip of print head.
 
②Use one-way wiping method to wipe fedar sublimation printer head with cotton swab, absolutely not greedy to use tap water!
 
③Before shutting down fedar sublimation printer, make sure that printhead of fedar sublimation printer head are closely attached to capping station and are completely airtight. This can effectively keep printhead moist and prevent from clogging.
 
④Clean waste ink cartridges, clamp waste ink tube with clamp, and tighten ink supply cover to prevent air from entering.
 
2. Fedar sublimation printer maintenance during long holidays
 
①Ambient temperature for storing fedar sublimation printer cannot be lower than zero degrees. If room temperature is too low, it will cause great damage to fedar sublimation printer. It is best to control room temperature at 15℃-30℃ and keep humidity at 35%-65%.
 
②If printhead of fedar sublimation printer is not used for a long time, it will cause nozzle to be clogged. It is recommended to print test strip every 3 days to check whether nozzle is clogged. If it is clogged, perform cleaning operation to ensure that nozzle is in the best condition.
 
③Cover fedar sublimation printer with a dust cover to prevent dust from contaminating printing machine, and place it in a safe place to do a good job of fire prevention, waterproofing, anti-theft, anti-rodent, and anti-insect work to avoid printer damage due to abnormal reasons.
 
3.Fedar sublimation printer preparation after the holiday
 
①Before turning on fedar sublimation printer, make sure that working environment of fedar sublimation printer reaches the best temperature and humidity. Temperature is 15℃-30℃, and humidity is 35%-65%. Please check fedar sublimation printer carefully to make sure that all parts are installed in place. After turning on fedar sublimation printer, print test strip to check whether print head is normal.
 
②The most feared thing about fedar sublimation printer is that printhead is blocked if it is not used for a long time, because it will cause many "complications", such as ink flying, offset needle, etc., shorten life of printhead, and even to be scrapped. During long holiday, users should pay special attention to maintenance of fedar sublimation printer.
 
If you want to know more details about fedar sublimation printer, you can check fedar official website:www.fedar.net or consult your local agent.