How to unclog fedar printhead of inkjet fabric bag printer?
- How to unclog fedar print head of inkjet fabric bag printer? In daily use, many fedar printer users are not clear about the usual maintenance methods of fedar printer head, and sometimes even cause some unnecessary losses. Here,fedar inkjet fabric bag printer will give you some professional opinions.
- Many fedar inkjet fabric bag printer users will soak printer head in water. In fact, this method can be used for a few days but not for a long time. Soaking fedar inkjet fabric bag printer head in water will undoubtedly allow the ink to be dissolved in water and achieve a smooth effect. But printer head is a heat-generating resistor. Soaking in water for a long time will soften the rubber strips connected to the circuit, and some will fall and age. The damage to fedar inkjet fabric bag printer head is relatively large.
- Generally clogged fedar inkjet fabric bag printer head (not working for a few days), users should gently wipe fedar inkjet fabric bag printer head with alcohol to wipe off the excess ink clumps (crystals), and then use the ink absorber (the manual suction is better) , generally should solve the problem.
- There is a problem with normal ink, which blocks the fedar inkjet fabric bag printer head. It should be reported to ink manufacturer or distributor in time to know that do not continue to use it to prevent print head from burning out (because fedar injet fabric bag printer head circuit will continue to heat after power on, and the ink will not flow if it is blocked, which will cause print head to dry!)
- For blocked fedar inkjet fabric bag printer head, you should use a needle tube to draw out the ink from the small hole on the top of fedar printer head as soon as possible. Then add the pure water we usually drink, shake it, and then draw it out, and wait several times in a row until the drawn water is clean! Just use the ink absorber to pump the nozzle part.
