There will have problems in the use of the transfer paper fabric printer, such as disconnection, image misalignment, ghosting, and color cast. So if there are garbled characters in the picture, how to solve it?
 
The garbled characters in the image may be due to the following reasons:
 
1. There is a problem with the USB cable of transfer paper fabric printer, you can check whether the USB cable is plugged in or not, or replace a USB cable.
 
2. There is a problem with the main board memory of the transfer paper fabric printer. You can turn off the printing machine and reinsert the memory bar on the main board, and then restart the transfer paper fabric printer to check whether it can print pictures normally.
 
3. Static electricity problems, general static electricity problems may also cause misalignment and ghosting, so you must plug in the ground wire when using the transfer paper fabric printer to avoid many problems caused by electrostatic interference.
 
4. If it is a garbled phenomenon of a certain color, it may be a problem with the nozzle of that color. You can clean the nozzle or replace the nozzle.
 
5. The printing software buffer space on the computer is not enough to cause garbled characters in the drawing. Generally, when drawing, do not use the computer excessively, and try not to install anti-virus software on this computer to avoid some conflicts between the computer and the transfer paper fabric printer driver.