How to make your Fedar fabric printer last longer is a concern for most users.There are five factors that extend the life of the Fedar fabric printer. Users who know the Fedar fabric printer know that the printhead of the Fedar fabric printer is the most easy to break, so extending the life of the printhead can also reduce the cost of the Fedar fabric printer.
1,Indoor environment
If the general working environment is not good, Fedar fabric printer will enter the dust, the dust enters the main ink cartridge and then the sub ink cartridge, and then enters the printhead again, which affects the print performance of the printhead and shortens the life of it.
2,Operation
The nozzle part of the printhead surface cannot rub with the object, otherwise there will be fine hair hanging on the nozzle surface. As a result, the printing effect is affected. So strictly speaking it is very important to operate the Fedar fabric printer.
3,Auxiliary accessories
Every accessory on the Fedar fabric printer has a certain purpose. Don't remove it casually. Like main cartridge, secondary cartridge, filter, etc.
4,Ink
The ink must use the ink recommended by the manufacturer, because these inks have undergone rigorous and long-term testing, which has certain protection for the Fedar fabric printer and the printhead.
5,Maintenance
Before powering off, you must clean the printhead first, and then place it on the moisturizing sea surface pad. This will ensure the same picture quality as the previous few days. After the printhead is stopped, the surface must be coated with cleaning liquid, and then wrapped with plastic wrap, and the nozzle should be close to the plastic wrap to avoid reducing the volatilization of the cleaning liquid and ink. It can extend the life of the printhead.
 
If the Fedar fabric printer is not used for a long time, we recommend that you remove the printhead of the machine, soak it with a cleaning solution, and then wrap the printhead with plastic wrap to prevent dust from entering it and affecting secondary use.