The error report of fedar heat transfer printer is usually in the form of a digital code. For non-professional users, they don’t understand the meaning at all. Here is the meaning and solution of the error code of fedar heat transfer printer’s printing controls.
 
30011: Failed to load the driver file
30012: The function interface loaded from the driver file failed
30013: Failed to obtain function vector table
The solution when the above error occurs:
1. Check if the installation program of fedar heat transfer printer is complete
2. Uninstall the software and reinstall
 
30014: Failed to initialize fedar heat transfer printer
The solution to the fault:
1. Check whether fedar heat transfer printer is powered on
2. Check whether the USB interface of fedar heat transfer printer is connected properly
3. Check whether fedar heat transfer printer board is normal
 
30015: Release the drive abnormally
The solution to this problem:
Check if fedar heat transfer printer is connected properly
 
30016: USB communication low-speed transmission status alarm
The solution to the problem
1. Check if the USB connection is normal
2. Restart the hardware
 
30017: USB communication failed to obtain fedar heat transfer printer status
30018: Initializing fedar heat transfer printer is abnormal
Solutions to the above problems:
1. Check if fedar heat transfer printer is connected properly
2. Restart the software
3. Restart the hardware
 
30019: Reset movement abnormal
30020: Stop motion abnormal
30021: Timeout waiting to stop motion
Solutions when the above problems occur:
1. Check whether the electromechanical mode is normal
2. Check if fedar heat transfer printer is connected properly
3. Restart the software
 
30022: Error in getting fedar heat transfer printer car position
30023: Obtain the movement status abnormal
When the above problems occur:
1. Check if fedar heat transfer printer is connected properly
2. Restart the hardware
 
30024: Abnormal movement when starting the specified mode
30025: During motor movement, the next movement cannot be executed
30026: Setting the micro-jet state error
30027: Error in obtaining micro-jet status
Solutions for the above errors:
1. Check if the configuration files match
2. Check if fedar heat transfer printer is connected properly
3. Restart the software
 
30028: Print thread abnormal error
The solution to the exception:
1. Check if the configuration files match
2. Check if fedar heat transfer printer is connected properly
3. Restart the software
4. Restart the hardware
 
30029: Data processing thread exception error
30031: Data interleaving error
30032: Copy data to print head buffer
The solution to the above problems:
1. Check if the configuration files match
2. Restart the software
3. Restart the hardware
 
30033: Movement distance is out of range error
The solution to the problem:
1. Set the movement distance smaller
2. Check if the configuration file matches
3. Whether the restart software and hardware versions match
4. Restart the hardware